Shoe washing machine with steam

   Our X6 shoe washing machine is suitable for shoe washing machines, dry cleaning machines, and laundries.    This is our third generation of basic semi-automatic cleaning machine. Our heating method uses instantaneous frequency conversion point separation heating, water and electricity separation, and a constant temperature heating body that is not in contact with water for safer heating. It heats up quickly, taking only 5 seconds to heat up to 40 degrees, and requires only 1500 watts of power. It can continue to heat up and maintain a constant temperature output for 24 hours. The control method uses a waterproof smart touch screen; in addition, the device comes with steam function, which can easily remove the smell of shoes, disinfect and sterilize at high temperatures, and a high-pressure spray gun can pre-clean the shoes. It can adjust the circulating water flow in seven levels; traditional shoe washing machines use heating tubes, which are low in cost, easily corroded by cleaning agents, and have the risk of leakage. They heat up slowly, taking 15 minutes to heat up to 40 degrees, and require 3500 watts of power, which cannot be used continuously. They do not have steam function or a spray gun, and the temperature cannot be adjusted. The control method uses physical buttons, which are prone to oxidation and water ingress failure.  

1.Current Situation of Shoe-Washing Industry: At present, China's shoe-washing industry is in the rapid development stage. The number of shoe-washing shops is increasing, but the technical level and service quality are uneven. Some shoe-washing shops still have problems such as simple equipment and rough technology, unable to meet the needs of consumers.   2.Development Prospects of Shoe-Washing Industry: With the improvement of people's living standards and the change of consumption concepts, the shoe-washing industry will usher in more broad development space. In the future, shoe-washing shops will pay more attention to improving service quality and technical level to meet consumers' demand for high-quality and convenient cleaning services. At the same time, with the popularization of the Internet and the rise of O2O mode, the shoe-washing industry will gradually achieve the integration of online and offline, providing consumers with a more convenient service experience.   In general, the development prospects of the shoe-washing industry are broad, but practitioners need to continuously improve service quality and technical level to adapt to market changes and consumer needs.

When purchasing a Commercial shoe washing machine, you need to pay attention to the following aspects： Cleaning mode: choose automatic or semi-automatic cleaning mode according to your needs. Function: consider whether it needs heating, high-temperature steam sterilization and deodorization, ultraviolet ozone disinfection and other functions. Noise: Pay attention to the noise level of the machine to avoid affecting daily life. Budget: Comprehensively consider according to individual needs and budget, and don't just look for cheap things. Channel: Whether it is a manufacturer, only after-sales service provided by the manufacturer can ensure the quality

With the acceleration of people's pace of life and the continuous improvement of living standards, everyone is busy with work and rarely has time to clean and maintain their shoes, so shoe-washing shops have quietly emerged. Most of the shoe-washing shops on the market charge between 25 yuan and 60 yuan for washing shoes, and the profit of shoe-washing shops is as high as over 90%. Apart from rent, utilities, and labor costs, the rest of the profit is basically from shoe-washing shops.   1.Technology is gradually refined. Traditional cleaning methods use washing powder, sulfur soap, and other materials, which can easily change the material of the shoes, causing them to harden, yellow, and deform, causing significant damage to the sneakers. Now the shoe-washing industry is gradually becoming specialized, with technological excellence and more environmentally friendly and healthy cleaning materials. 2.Great market potential. Nowadays, many young people are not willing to spend a lot of time cleaning their shoes, and they don't want to wear dirty shoes when going out. This is one of the reasons why the shoe-washing industry has emerged. Therefore, it can be seen that the market potential and growth of the shoe-washing machine industry are very large, and the consumption scale will continue to grow in the future.   3.More professional services. With the improvement of residents' economic level, new shoe-washing shops will focus more on shoe-washing and care, and will introduce more professional technicians and management personnel to achieve scale management. A one-stop service such as delivering and picking up shoes greatly reduces customer time and embodies the humanization of the industry.   4.Good development prospects. As time goes by, street stalls have become indoor stores, mostly run by couples. As long as people wear shoes or use leather products, the cleaning and care industry will remain prosperous. It is a sunrise industry. There is huge market potential for cleaning, repairing, and maintaining shoes. 5.Diversified business models. The simplest is to run a small shop safely and steadily, serving the surrounding people. Another is to have the ability to acquire traffic, open a studio, hire master craftsmen, do well online, and serve high-end customers. Shoe-washing shop is a very good project, and it is worth considering for young people who want to start their own business.  

1.Ensure the correct connection of water and power sources, and comply with relevant safety regulations.   2.Place the shoe washing machine in a dry and ventilated place, and ensure sufficient space around it to avoid blockage and restricted air circulation.   3.Regularly clean the shoe washing machine. You can use a gentle cleaner and a soft cloth to wipe the exterior and shoe washing tank. Avoid using corrosive or granular cleaners to prevent damage to the shoe washing machine.   4.Regularly clean the filters and drainage pipes of the shoe washing machine. According to the user manual, remove debris from the filters and check if the drainage pipes are unobstructed.   5.Do not overload the shoe washing machine. Please place shoes according to its rated capacity to avoid affecting the washing effect and damaging the machine parts.

Basic Classification of Shoes by Material To wash a pair of shoes well and satisfy customers, you first need to understand the basic theoretical knowledge of shoe washing. Among them, the most important is the classification of shoes. There are many different classification standards for shoes, such as by function, which can be divided into sports shoes, daily shoes, rain shoes, etc.; by material, which can be divided into leather shoes, cloth shoes, plastic shoes, etc.   Based on the actual operation of the store and the common shoe materials, Gao Li Jie has formulated a new classification standard, which is more convenient for us to provide subsequent cleaning and maintenance services for shoes. Mei Jie Jia mainly divides all shoes into the following nine categories: 1.Mesh shoes Mainly refer to sports shoes with mesh material on the upper part. When cleaning, you can use the high-pressure water gun of the X6 shoe washing machine to clean it, which will greatly improve the cleaning efficiency and ensure a high degree of cleanliness after cleaning. Mesh shoes Mainly refer to sports shoes with mesh material on the upper part. When cleaning, you can use the high-pressure water gun of the X6 shoe washing machine to clean it, which will greatly improve the cleaning efficiency and ensure a high degree of cleanliness after cleaning. 2.Canvas shoes These shoes usually have a thick rubber sole and are made of canvas material on the upper part. Generally, they can be cleaned using our commercial shoe washing machine. 3.Suede Shoes Suede shoes refer to a general term for leather shoes with hairy surfaces, opposite to smooth leather shoes. Leather can be divided into top-layer leather and second-layer leather, and suede leather is a type of second-layer leather, while the sandblasted leather below is a type of top-layer leather. Suede leather has a strong velvety feel, while the surface of sandblasted leather may also have a slight velvety feel (not easily noticeable), but it is overall smooth (or with a litchi pattern). 4.PU Full name: Polyurethane. PU is relatively inexpensive to produce. Its advantages include breathability, water resistance, lightweight, and strong toughness. However, its disadvantages include poor wear resistance and susceptibility to damage when exposed to direct sunlight. 5.Microfiber Also known as microfiber leather, it has excellent fold resistance comparable to that of genuine leather, making it quite durable. However, its manufacturing cost is relatively high. 6.Suede Suede is created by buffing the surface of leather to smooth out the fibers and texture, revealing a tidy and uniform appearance. As suede is made from top-grain leather, it offers excellent durability and water resistance, making it relatively pricier, often more than twice the cost of nubuck leather. 7.Pearly Finish The surface of pearly leather is coated with a layer of resin mixed with pearlescent or metal powder, creating a shiny appearance. It mainly comes in three types: water-based pearly, oil-based pearly, and holographic pearly. Water-based pearly has a relatively dull gloss, while oil-based pearly has a brighter gloss. Holographic pearly, on the other hand, displays a rainbow of colors when exposed to sunlight. 8.Lacquered Finish Lacquered leather, also known as patent leather, refers to a type of leather processed to have a shiny and sturdy surface. A layer of lacquer is sprayed onto the leather to enhance its gloss. Lacquered leather mainly comes in two types: water-based and oil-based. Water-based lacquered leather is thicker, has a rougher feel, and is generally more affordable. Oil-based lacquered leather is sturdy and durable, but it tends to be more expensive. One downside of lacquered leather shoes is that they are prone to scratches when the surface is rubbed. 9.Nubuck Nubuck refers to a general term for leather that has been milled or sanded to create a fine, velvety surface. When washing this type of shoe, excessive water usage can result in color bleeding or clustering on the shoe's surface. Therefore, it is recommended to dry clean or brush these shoes as much as possible. Based on these nine different types of shoe surfaces, the choice of whether to use a machine or hand wash should be made. Additionally, different shoes often have different common issues, which require targeted cleaning and care plans.  

In this fast-paced era, we aspire not only for the speed of life but also for the perfect fusion of quality and attention to detail. Starting with every step we take, a pair of clean, shining shoes can not only elevate our personal image but also elegantly express our attitude towards life. Today, let's embark on a new chapter in the shoe cleaning industry and uncover the secrets that bring shoes back to life. I. The Evolution of Shoe Cleaning: From 'Making Do' to 'Demanding Excellence' Once upon a time, shoe cleaning was a simple matter of rinsing with water or tossing them into the washing machine. But now, with the enhancement of living standards, shoe cleaning has subtly transformed into an art form, a relentless pursuit of excellence in life's finer details. Professional shoe cleaning shops have sprung up like mushrooms, armed with advanced cleaning equipment and scientific cleaning techniques. They cater to different materials and brands with personalized cleaning solutions, ensuring that every pair of shoes receives the utmost care and attention. II. Technology Empowers Intelligent Shoe Cleaning In this era of rapid technological advancements, the shoe cleaning industry has also embraced the trend, introducing smart shoe washing machines, eco-friendly cleaning agents, and other high-tech products. These intelligent devices achieve deep cleaning and maintenance of shoes by precisely controlling water temperature, washing time, and detergent dosage, all while avoiding potential damage caused by traditional methods. The use of eco-friendly cleaning agents further makes the process greener and healthier, aligning with modern people's pursuit of sustainable development. III. Service Upgrade: Experience Comes First Beyond technological innovations, the shoe cleaning industry has also undergone a comprehensive service upgrade. From scheduled pick-up and delivery to the doorstep, one-stop services eliminate the hassle of back-and-forth trips for customers. Additionally, many shoe cleaning shops offer增值服务 such as shoe care and repair, revitalizing customers' shoes beyond mere cleanliness. This customer-centric service philosophy transforms shoe cleaning from a mundane chore into a lifestyle indulgence. IV. Shoe Cleaning Culture: Leading a New Lifestyle Trend As the shoe cleaning industry continues to evolve, a unique shoe cleaning culture has gradually emerged. It advocates a lifestyle that values quality of life and meticulous attention to detail. Increasingly, people recognize that clean, well-maintained shoes demonstrate respect for others and showcase one's self-image. Consequently, regular shoe cleaning and maintenance have become a fashionable trend, pioneering a new lifestyle ethos. In conclusion, the shoe cleaning industry is entering our lives with a fresh face and attitude. It is not merely a service but an embodiment of life attitude. Let us embrace this change and let every step we take shine with quality and confidence.